The problem of the gap between the bathroom and the wall is familiar to everyone. Even the smallest seam entails a lot of unpleasant consequences: a nasty smell of dampness , mold , smudges , puddles and, in the end , who are flooded. The most effective method of dealing with this phenomenon is to close the gap and forget about the problem. We will talk about a few simple wayshow to close the gap between the bathroom and the wall. These methods will master even the most fragile shoulders!
Gap between bathroom and wall
Curb tape
The fastest and most affordable way for those who plan to deal with small gaps. The tape contains fungicides , so the mold problem will be solved by itself. The tape is glued to a dry, clean surface , removing the protective strip from the underside.
True , professionals do not really trust the glue applied by the manufacturer , therefore they recommend using liquid nails in addition.
Sanitary silicone sealant
This method is also suitable for the narrowest gaps. To achieve the best effect, the joints are pre-cleaned and dried , and then a sealant is applied from a special cylinder.
And do not forget that after using the sealant, the room must be well ventilatedbecause when it dries, acetic acid is released , which has a rather unpleasant odor.
Useful: the seam will turn out more even if you use masking tape to isolate the tile.
Polyurethane foam
This , in our opinion , is the easiest way to seal seams. It is only necessary to clean and dry the surface , then apply the foam from the balloon into the gap between the bathtub and the wall.
The material will expand and fill all the available space. After that, the material must be allowed to dry thoroughly. And do not forget that the foam must be moisture resistant!
Cement mortar
This is a great and effective way for large gaps! As before , we clean the surface , but do not dry it. Then we prepare special formwork , which will not allow our solution to fall down.
After wetting the gap area , apply the solution and leave it to dry completely. This method is rather unaesthetic , therefore we recommend sticking a curb tape or ceramic tile over the solution.
Ceramic curb
And the last , perhaps the most aesthetic option than to seal the gap between the bathroom and the wall is a ceramic curb. Such a border sits on a special tile adhesive. Much more time and effort will have to be applied , but the result will exceed all expectations!
Decided on the method? Then go ahead! A little effort and voila - the bathroom is fresh , beautiful and cozy!
Save so you don't lose
