Why do experienced gardeners drill a hole in the toilet?

A “civilized” equipped toilet will help to improve the quality of rest in a summer cottage. The convenience of using it in a country house , in a personal plot or in a bathhouse is incomparable with a conventional outdoor toilet. The difference in the operating conditions of street plumbing at different times of the year creates certain difficulties , which can be eliminated in a simple way.

The difficulty of operating outdoor toilets in winter

The experience of using toilets in the country shows that when the temperature drops in winter, the water in the water seal can freeze. In this case, the plumbing equipment will simply burst due to the expansion of the volume of the frozen liquid. It is easy to drain water from the pipes and the washbasin , which makes it difficult to empty the water seal of the toilet bowl , because it cannot be easily removed and emptied.Why do experienced gardeners drill a hole in the toilet?

There are special types of toilets without a water seal , which are produced specifically for use outside residential premises at their summer cottage. But if we are talking about ordinary plumbing , then special techniques or a simple refinement of the system will be required.

What are the ways to pump out water?

You can remove the liquid from the water seal using a syringe , a vacuum cleaner hose , a piece of sewer pipe and a jar. But the complexity and painstakingness of the procedure , as well as its unaesthetic appearance, are not suitable for squeamish people.Why do experienced gardeners drill a hole in the toilet? In addition, there is a less time-consuming and complicated way to remove the liquid from the water seal.

Why drill a hole in the toilet?

You can solve the problem very easilyif you drill a hole in the bottom of the water seal with an electric drill and attach a hose or thin tube to remove fluid from the water seal. Refinement of street plumbing does not require special skills , you need to act carefully and accurately , especially at the end of drilling , when cracks are most likely to appear.

To do this, you will need special tile drills , and then a funnel for processing ceramics of the smallest possible diameter for subsequent deepening. The fragility of faience suggests caution when working with it , otherwise the plumbing may crack. The speed of the drill should be minimal , and a high-quality funnel on porcelain stoneware can greatly facilitate the task.Why do experienced gardeners drill a hole in the toilet?

After drilling the desired hole, insert a fitting to secure the hose and two gaskets. The hose is pulled over the fitting and remains in the hole until the onset of cold weather. It is pinched with a tube or rope , and such an overlapped folded hose does not interfere with the use of plumbing all summer. When the temperature drops , but effective mechanism will help you quickly flush the water from the toilet water seal . To do this, just release the hose and direct it into a low container. So you don’t even touch the liquid from the toilet with your hands , it will pour out by itself without any effort on your part.

If you are late with draining the water , this can lead to such undesirable consequences as cracking the toilet bowl in the knee and bowl area.

Idea for an outdoor toilet

The classic version of the equipment of a wooden "house" can be significantly improved a water drain or even a washbasin.Why do experienced gardeners drill a hole in the toilet?

At the same time, the installation of a summer water supply system made of plastic pipes will allow you to create a full-fledged bathroom in your summer cottage , and disassemble the structure for the winter or simply drain water from it. A similar device is used for bath equipment.

For a water seal, instead of a hose for an outdoor toilet, you can use a thin tube , and direct the drain into the sewer outlet pipe.

How to get rid of an unpleasant smell after draining the water seal?

If you want to prevent the appearance of an unpleasant odor after draining the liquid from the water seal , various methods are used for this.Why do experienced gardeners drill a hole in the toilet? The easiest way is to insert the chamber from the ball into the resulting water seal hole and pump it up until a tight air lock appears. More difficult will be the installation of a specially equipped check valve with a damper.

It is categorically not recommended to replace the liquid in the hydraulic seal with antifreeze compounds and other liquids , they can destroy an autonomous sewer or evaporate during the winter season.

Save so you don't lose

DIY repair

Add a comment

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!:

For any site suggestions: [email protected]